cara nak buat networking 2 komputer

[marvelous]

aku up balik...sbb rasanya soalan yg aku tanya ni lebih kurang je...

ok..pasal bro yeeradhi tu aku tak masuk campur...tp aku tahulah dia scammer...

tp aku ada masalah nie..ceritanya mcm nie...

ada kawan aku kata boleh buat...nak guna satu printer dgn 2 pc..tp hanya gunakan usb hub dgn usb male to male aje...lepas tu ada setting networking..tp bukan guna hub networking...hanya guna usb hub dgn male to male usb aje....

ada sesiapa pakar tahu..adakah boleh buat benda ni..

 

[akmal_rizad]

kalau dah ada networking antara 2 pc atau lebih, pc yg ada printer kena aktifktan share printer. pastu semua pc dalam network 2 leh lenjan printer 2...

 

[RyomaKun]

wow..gud thread...
thanx for sharing here.
like this.

 

[SmileAlways]

 

[Hulas]

Wow, this is damn old question anyway. But I can tell you that in my very youth long long time ago we connected our computers not even with LAN cable or something like that but with simply COM cable if you do remember that interface even or so LOL

 

[derozza]

I dont know if this was resolve. But to make Networking via 2 pc without hub or route.
Step 1. Use cross over cable.
Step 2. Assign manual IP address on 1 pc act as Main Pc with printer. example 192.168.1.1 (Ip Address)
255.255.255.0 (Subnet Mask)
192.168.1.254 (Default Gateaway)
Step 3. Assign manual IP to 2nd pc with Ip Address
example 192.168.1.2, 255.255.255.0 (subnet mask), 192.168.1.254 (Default Gateaway)

Step 4. Do printer sharing on Main Pc
Step 5. Using 2nd pc, add new printer via network. if cannot found then search by using ip address.

Above Windows 7, u need to turn on printer sharing network file discovery. Usually blocked by windows. To do super user also can but need a few setting need.

VLAN can be configure if u got more than 2 pc. with different access level. But hope ur this resolve ur case. Thanks