Apologize for all the people who waiting the installation instruction so long.
There are somethings you need to prepare
1)black color tape (normally ppl using to cover the wire connection place)
2)A knife or scissors for cutting wire and tape
3)some extract wire
4)A switch
5)The LED strip
Instruction manual:
Below motorbike is suzuki RGV for example
1)Find out you motor battery, you should be able to see the "+" & "-" sign on the battery
2)Connect a wire to the "+" sign battery
3)Another end of wire from "+" sign battery connect it to a switch middle (the switch must has 3 legs)
4)After the switch middle has connected, another two blank unconnected legs you can use either one. Remember use the black tape to cover the connection between wire and switch
5)The wire from step 4 come out from the either unconnected leg of switch, connect it to the LED strip red color wire
6)The black color wire of LED strip should connect back to the battery "-" sign
7)After you turn the switch, the LED can be lighted up
From the image i did not wipe off the LED tape which paste behind the LED, so you can see that the LED didnt close to the motorbike body chassic
You can put the switch whatever place you like, as long as you hand is convenient to turn it
Example i put it under the motorbike handle
There are somethings you need to prepare
1)black color tape (normally ppl using to cover the wire connection place)
2)A knife or scissors for cutting wire and tape
3)some extract wire
4)A switch
5)The LED strip
Instruction manual:
Below motorbike is suzuki RGV for example
1)Find out you motor battery, you should be able to see the "+" & "-" sign on the battery
2)Connect a wire to the "+" sign battery
3)Another end of wire from "+" sign battery connect it to a switch middle (the switch must has 3 legs)
4)After the switch middle has connected, another two blank unconnected legs you can use either one. Remember use the black tape to cover the connection between wire and switch
5)The wire from step 4 come out from the either unconnected leg of switch, connect it to the LED strip red color wire
6)The black color wire of LED strip should connect back to the battery "-" sign
7)After you turn the switch, the LED can be lighted up
From the image i did not wipe off the LED tape which paste behind the LED, so you can see that the LED didnt close to the motorbike body chassic
You can put the switch whatever place you like, as long as you hand is convenient to turn it
Example i put it under the motorbike handle
Last edited:
boleh bagi keterangan(brighness) untuk setiap colour tak? brape jarak untuk setiap LED?(LED/Meter) dan ade LED yg disusun lebih rapat tak?
