Camne nak settle "Disk Boot Failure, Insert System Disk and Press Enter"

[modengster]

salam semua dan selamat berpuasa...

alkisahnya camni, aritu tgh syok2 aku layan megadeth kat youtube pastu tetiba je pc aku hang...
tekan ctrl+alt+dlt pon tak jalan...
so aku tekan je lah button reset...
pastu masalahnya skang ni, aku tak leh nak boot masuk windows...
dia akan keluar msg ni "Disk Boot Failure, Insert System Disk and Press Enter"...
aku dah try masuk cd driver aku pastu tekan enter, tp xda effect jugak dia masih kuar msg yg sama...
try format pon tak bleh gak, masih keluar msg yg sama...
dah habis aku cabut2 wayar dlm tu pon hampeh gak x de apa2 effect...
so skang ni aku dah buntu, aku nak mintak tolong dekat pakar2 IT dlm CG ni tlg setelkan prob aku ni...

p/s: harddisk masih ok sebab try cabut dr pc dan on kan dekat laptop dia okey...

problem dah setel...thanx to bro akecema...

cabut semua device DVD ROM - Hardisk - Floppy -
test start ok ke idak
kalo ok sambung DVD ROM
test start balik ok ke idak
test satu2 pastu ok ke idak

 

[bebird]

masalah yg sama pd pc aku.. sampai sekarang tak settlekan...

sape2 bole tolong jawabkan soalan tt..??

 

[jai_x5]

Disk Boot Failure, Insert System Disk and Press Enter

This is actually a fairly common boot error: "Disk Boot Failure, Insert System Disk And Press Enter". However, it can scare the heck out of you if your system was previously working fine and then suddenly won't boot. There are many reasons a person might encounter this error. In the following simple solution, I outline some of the basic problems to check for when troubleshooting this Windows boot problem.

How to Fix Disk Boot Failure, Insert System Disk and Press Enter:

These are some troubleshooting tips to try if the problem suddenly occurred and you have not made any modifications or changes to your system hardware.

1. Ensure no CD/DVD or Floppy disks are inserted when attempting to boot.
2. Unplug any connected USB storage devices. Cameras, Phones and iPods have been known to cause this boot problem as well.
3. Ensure that your system BIOS lists the hard drive as one of the boot devices. In addition, set the boot order in BIOS to allow the hard drive to become the first boot device.
4. Ensure your hard drive is recognized during system post. If it is not, check your cables and connections.

If the computer is a new build or you have made hardware changes to your system, like installing a new CD, DVD or hard drive, use the following troubleshooting tips.

1. If you have recently installed a new hard drive, CD/DVD drive, check the jumpers on the drives. In some cases, with older IDE cables, you cannot use the Master and Slave jumper settings and you must use Cable Select.
2. As a last resort, you may need to perform a System Repair if your system has become corrupted.

PS: Dekat bios select cd/dvd sebagai 1st boot device, pastu save. Masukkan cd/dvd windows and restart. Dia akan boot melalui cd/dvd dulu.

 

[akecema]

cabut semua device DVD ROM - Hardisk - Floppy -
test start ok ke idak
kalo ok sambung DVD ROM
test start balik ok ke idak
test satu2 pastu ok ke idak

 

[modengster]

cabut semua device DVD ROM - Hardisk - Floppy -
test start ok ke idak
kalo ok sambung DVD ROM
test start balik ok ke idak
test satu2 pastu ok ke idak

cayalah bro...
aku try cabut dvd-rom ngan floppy baru boleh masuk windows...
thanx bro...
tapi kenapa jadi camtu plak bro?

 

[strash_x]

biasa jadi macam ni dia tak detect hardisk tu.

Cara yang aku buat.

1. On PC dan tgk kat BIOS detect tak BIOS,
2. Kalau tak detect, try buka dan pasang balik wayar dia, (kalau da banyak kali cuba takleh) tukar cable sama ada IDE/SATA.
3. Kalau takleh juga aku tukar board hardisk tu (tapi pastikan sama brand, sebelum ni guna maxtor kebanyakkan board dia sama)
4. Hardisk ok tapi takleh nak load windows. (pernah terjadi kat laptop aku, takboleh nak startup, tukar hardisk dan hardisk yg lama tu jadikan external - boleh pulak hehe3)


Sekian saja dimaklumkan~

 

[modengster]

biasa jadi macam ni dia tak detect hardisk tu.

Cara yang aku buat.

1. On PC dan tgk kat BIOS detect tak BIOS,
2. Kalau tak detect, try buka dan pasang balik wayar dia, (kalau da banyak kali cuba takleh) tukar cable sama ada IDE/SATA.
3. Kalau takleh juga aku tukar board hardisk tu (tapi pastikan sama brand, sebelum ni guna maxtor kebanyakkan board dia sama)
4. Hardisk ok tapi takleh nak load windows. (pernah terjadi kat laptop aku, takboleh nak startup, tukar hardisk dan hardisk yg lama tu jadikan external - boleh pulak hehe3)


Sekian saja dimaklumkan~

thanx bro...
problem dah setel atas bantuan bro akecema...
paid