ALERT! OS install mode Enable

[aragon]

nie aku kat satu forum... cuba try test....

Click on Start - Run - type in MSCONFIG and click on OK. Go to the BOOT.INI tab and click on the Advanced Options button.
Make certain that the checkbox for the /MAXMEM= line is cleared and
there is no value in the data box for that line.

Visit the Windows Memory Diagnostic site, http://oca.microsoft.com/en/windiag.asp download the small utility and run the tests.

Go to http://www.crucial.com and run the scan.

 

[arapaima]

klau klik F1 tu...mmg bolek tekan..tp,benda tu nmpak pic windows bergerak tu jak...then lepas tu...gelap trus...camana?ader idea?

bunyi cam mrh je....cuba ko tgk ade bape RAM kat slot dier...klu dua ko try cabut pastu try pasang satu dulu...klu xleh try satu lagi...klu ade satu je RAM tu...ko try guna RAM yg lain...pinjam la dr mana2 dulu....

 

[VAMP]

mybe ada problem dengan memory slot pada motherboard, cube ko try check tgk.

 

[aragon]

apa lagi ..cargasssss wat try n error tu.... heheehe

 

[zattara]

nie aku kat satu forum... cuba try test....

Click on Start - Run - type in MSCONFIG and click on OK. Go to the BOOT.INI tab and click on the Advanced Options button.
Make certain that the checkbox for the /MAXMEM= line is cleared and
there is no value in the data box for that line.

Visit the Windows Memory Diagnostic site, http://oca.microsoft.com/en/windiag.asp download the small utility and run the tests.

Go to http://www.crucial.com and run the scan.

nak masuk nak taip msconfig cmna..klau nak masuk windows pon blank screen...ermmm...:-?

klau klik F1 tu...mmg bolek tekan..tp,benda tu nmpak pic windows bergerak tu jak...then lepas tu...gelap trus...camana?ader idea?

bunyi cam mrh je....cuba ko tgk ade bape RAM kat slot dier...klu dua ko try cabut pastu try pasang satu dulu...klu xleh try satu lagi...klu ade satu je RAM tu...ko try guna RAM yg lain...pinjam la dr mana2 dulu....

tak marah pon...aku tnya ader idea lain lagi tak..sbb dah cuber kaedah tekan mnekan tu...sori klau ko terbaca ngan nada marah...takder niat pon...

mybe ada problem dengan memory slot pada motherboard, cube ko try check tgk.

owh...ini rasanya ye kot...tp,seigt2 pglaman korang2 suma...klau memory slot dia akan berbunyi buzzer tu kan?..so,tak betoi gaks kot...nanti aku cek sok plak la...klau slot tu terbakar ker aper...

apa lagi ..cargasssss wat try n error tu.... heheehe

huhuhu...ni lagi otai...try n error jgk la ni..tu tnya korang2 sume...ader idea lain nak try ni..sbb ini first time aku jumpa prob cmni....


p/s..thnks suma sbb support..even hard disk ni tak jadi lagi...

ermm...sape ader kaki area2 shah alam mane2 senang aku nak cari..kedai yg boleh amik data dari cakera hard disk...ader tak sesapa kat sini?area JB masa aku blajo dlu2..ader la..skang ni area sini...ader tak?

 

[aragon]

cuba check error tu kat sini

http://pompone.cs.ucsb.edu/admin/530_Workstation/2codes.htm

or

http://support.dell.com/support/edocs/systems/ws450/en/ug/solve.htm

 

[zattara]

cuba check error tu kat sini

http://pompone.cs.ucsb.edu/admin/530_Workstation/2codes.htm

or

http://support.dell.com/support/edocs/systems/ws450/en/ug/solve.htm

thanks aragon...but,kat bios punya setting tu dah off dah dia punya setting...still sengal jgk..kuar warning lagi...hermmm..:-?

 

[DDos]

thanks aragon...but,kat bios punya setting tu dah off dah dia punya setting...still sengal jgk..kuar warning lagi...hermmm..:-?

tak setel lagi ke bro? ko passing kat aku di melaka ni, meh aku godak plak

 

[zattara]

tak setel lagi ke bro? ko passing kat aku di melaka ni, meh aku godak plak

tak setel lagi la dos...ermm...melaka yek?adui...jauh tu dos...klau dekat area shah alam ker..mane2 ker..ok la jgk...boleh gaks kata ader customer nak jumper..klau melaka..supplier syrkt pon takder...hermmm...



p/s:- thread recovery dah ader kan?huhu...nak try guna software lask..tp,os aku tak leh masuk..huhuh...lupe2..)

 

[arapaima]

ko dah try tukar RAM ke belum En Tuan Tanah...????