asuadi
Active Member
- Messages
- 1,974
- Joined
- Jan 7, 2013
- Messages
- 1,974
- Reaction score
- 217
- Points
- 38
BTC
USD
83,785.0
Gold
USD
4,283.53
Time now:
Jun 1, 12:00 AM
Bincang apa jua berkaitan decoder dan satelite
- Thread starter SATgi
- Start date
En. Rhoma Irama
Super Active Member
- Messages
- 7,565
- Joined
- Nov 16, 2007
- Messages
- 7,565
- Reaction score
- 707
- Points
- 111
kemungkinan browser tuan bermasalah...
kawan tak pernah alami
Terima kasih tuan... satu perkongsian yang sihat
jali466
Banned
- Messages
- 571
- Joined
- Jun 7, 2008
- Messages
- 571
- Reaction score
- 1
- Points
- 15
aku pernah kena kes mcmni. samapai dah fedup dah nak beli tunner baru. tapi dah ok skrg apa yg aku buat adalah back to basiq.first make sure lnb conection tak dok peroblem takut shot. kedua aku install basic excaliber image ssl82. scan semua chenel masuk ok fine. barulah aku ikstall image baru. pli sekarg
satlink
Fun Poster
- Messages
- 938
- Joined
- Oct 30, 2012
- Messages
- 938
- Reaction score
- 10
- Points
- 15
wah changing lagi... sangat laju la mreka IPxm ini...
thanks suria..
satu langkah untuk mengelak dari di samun oleh sang penyamun...
aku dah tak larat nak ikut... hari ni aku flash masuk... esok dah rolling..
(
Dreamboxjb
Legendary Member
- Messages
- 11,779
- Joined
- Apr 30, 2011
- Messages
- 11,779
- Reaction score
- 77
- Points
- 135
Ramai yang PM kepada i, lalu i mintak Tuan Haji Rohma Update dalam thread bagus ini lah ya, tq. Jika sudah ada, ignore lah...
To Manualy update firmware on a DM 500HD and the dm800se hd models
via mini-usb service port & Lan Network
Items required:
1) A TO B mini-usb male to male [same as a camera USB] & Cat5 Network Cable
2) if you have a genuine model you can get the latest dreamup 1.3.3.9
you can also find the usb driver here if needed
(USB to UART Bridge Virtual COM Port (VCP) driver)
from :-dream-multimedia-tv.de/en/downloads website
[if your model is a clone use the sunray version of dreamup]
**********************************************
Process:
1)first on the Dream 500HD/dm800se turn off with the switch on
the rear panel
2)next connect the cable for its part mini-usb port and
"Service" of the Dream 500HD and the USB to a USB port on your PC
and also the Lan Cable from your Router
3)Just plug it in, the PC will detect new hardware connected to the system:
4)The PC will ask the driver for this new component,
Windows 7 will download the driver Automaticly for you
the driver is cp210x usb to uart bridge controller
5)Open the Windows Device Manager,
and you will see the new hardware installed,
will appear as COM port (even a USB cable).
In the following example, is recognized as the cable into the port COM4.
6)next opened the universal DreamUP 1.3.3.9 [this is the latest version]
and select the update COM port (like any other model of Dreambox).
At this point, we choose the COM port that we appeared in the previous step
(COM4 in this example).and make sure there is a tick in the use network box
7)Press the Connect button the DreamUP universal panel and then go to the
dreambox and power it up to turn on again now the Dream 500HD/800se will
now to start up loading firmware.and once compleated the dreamup loader will
go in to HTTP mode you then click the flash button and find the correct image then on the window click open and it will load on the dreamup and load on your dreambox once fully loaded exit the loader and turn your dreambox off and on again at the rear switch now the image will boot and you can the configure the box
To Manualy update firmware on a DM 500HD and the dm800se hd models
via mini-usb service port & Lan Network
Items required:
1) A TO B mini-usb male to male [same as a camera USB] & Cat5 Network Cable
2) if you have a genuine model you can get the latest dreamup 1.3.3.9
you can also find the usb driver here if needed
(USB to UART Bridge Virtual COM Port (VCP) driver)
from :-dream-multimedia-tv.de/en/downloads website
[if your model is a clone use the sunray version of dreamup]
**********************************************
Process:
1)first on the Dream 500HD/dm800se turn off with the switch on
the rear panel
2)next connect the cable for its part mini-usb port and
"Service" of the Dream 500HD and the USB to a USB port on your PC
and also the Lan Cable from your Router
3)Just plug it in, the PC will detect new hardware connected to the system:
4)The PC will ask the driver for this new component,
Windows 7 will download the driver Automaticly for you
the driver is cp210x usb to uart bridge controller
5)Open the Windows Device Manager,
and you will see the new hardware installed,
will appear as COM port (even a USB cable).
In the following example, is recognized as the cable into the port COM4.
6)next opened the universal DreamUP 1.3.3.9 [this is the latest version]
and select the update COM port (like any other model of Dreambox).
At this point, we choose the COM port that we appeared in the previous step
(COM4 in this example).and make sure there is a tick in the use network box
7)Press the Connect button the DreamUP universal panel and then go to the
dreambox and power it up to turn on again now the Dream 500HD/800se will
now to start up loading firmware.and once compleated the dreamup loader will
go in to HTTP mode you then click the flash button and find the correct image then on the window click open and it will load on the dreamup and load on your dreambox once fully loaded exit the loader and turn your dreambox off and on again at the rear switch now the image will boot and you can the configure the box
Dreamboxjb
Legendary Member
- Messages
- 11,779
- Joined
- Apr 30, 2011
- Messages
- 11,779
- Reaction score
- 77
- Points
- 135
satu langkah untuk mengelak dari di samun oleh sang penyamun...
aku dah tak larat nak ikut... hari ni aku flash masuk... esok dah rolling..
sahabat,
add, jangan replace...
nak update SW cuba minta back up dr seller cgaris..senyap je..
kang update Sw burn terus cgaris...1thn lak tu.. hu hu hu
betul la bro.... jgn ckp weekend...weekdays pun hu hu hu.. sampai anak kecik aku menjerit-jerit marah bila asyik naik moto scramble je... tp aku dh terlanggan 12bln hu hu hu...
kakhi
Fun Poster
- Messages
- 939
- Joined
- Mar 27, 2012
- Messages
- 939
- Reaction score
- 0
- Points
- 10
salam bro agak2 key ni leh main kat openbox x3 tak....tq
Similar threads
