Riger DB102-Mcmana nk autoconnect

[bmw_7series]

Slm,
Tlg aku mcmana nk setting modem utk autoconnect trus je msk intenet?Skang ni kene dail dlu baru leh masuk tenet..please

 

[sanz]

dial up ke broadband?

 

[bedul]

Riger DB102

Go to http://192.168.1.1.

* Username: tmadmin
* Password: tmadmin

Then you will see this above page. Go and click at the WAN Tab and click at PPP.

Set the new interface as:

* PPP interface = 0
* ATM VC = aal5-0
* Protocol = PPoE
* Use DNS = enable
* Security = PAP

Don’t forget to set your username as username@streamyx and also your TMNet Streamyx password. When done, click Submit.

Click on ATM VC and make sure interface are set as:

* aal5-0 VPI = 0
* VCI = 35
* MUX = LLC
* Max proto = 2

After that, click on Admin and then Commit and then Reboot Once it’s done you should check your Internet connectivity by loading your favorite website.

If you’re unable to go to 192.168.1.1, please make sure that your PC IP is in the range of 192.168.x.x.

 

[tebbaloi]

aku pun pakai model nih.. selalu error 691 lately.. manual connect 5-10 kali baru dapat.

 

[cyborg]

Setkan menda tu jadi router. Asal mula dia jadi bridge.