BTC USD 76,358.3 Gold USD 4,327.02
Time now: Jun 1, 12:00 AM

openbox X5

Salam... guana otai2 openbox harini? ceroh dohkan... dok gelap doh loni, kawang ada masalah nga openbox x5 sutil ni. on jah tbk lampu meroh jah... guana citer ni? ado saper bleh tulung dok?
 
Salam... guana otai2 openbox harini? ceroh dohkan... dok gelap doh loni, kawang ada masalah nga openbox x5 sutil ni. on jah tbk lampu meroh jah... guana citer ni? ado saper bleh tulung dok?

Openbox X5 Recovery tool and method
Here is the full process of recovery, if your box is dead due to power cut during the upgrade. It is suggested not to upgrade without power backup


Note:
With this, you can flash receiver via any USB port, even receiver was dead..


How to Boot from USB drive?
Step 1: Create “recovery” folder in USB drive
Step 2: Copy bin file to the “recovery” folder of USB drive.
Cautions)
1. USB drive shall be FAT32 file format. Its doesn’t support NTFS format.
2. Only one related .bin file shall be in recovery folder.
3. Do not change the file name. If it is different, the boot from USB will not work.
Step 3: Attach the USB device to the STB via any available USB port.
Step 4: Turn power on while pressing OK key on front panel.
Step 5: Keep pressing OK key until showing “Lxxx” message on LED of front panel.
Step 6: Check TV screen that s/w is recovering(updating) by USB drive.
Step 7: The STB will restart automatically after finishing s/w recovery (update).

http://www.4shared.com/rar/aNj0rPkH/KD_P...B2013.html

Note: you can use any software bin file of X5 for recovery......
semoga berjaya...:):)
http://stbfirmwares.com/Thread-Openbox-X5-Recovery-tool-and-method
 
Openbox X5 Recovery tool and method
Here is the full process of recovery, if your box is dead due to power cut during the upgrade. It is suggested not to upgrade without power backup


Note:
With this, you can flash receiver via any USB port, even receiver was dead..


How to Boot from USB drive?
Step 1: Create “recovery” folder in USB drive
Step 2: Copy bin file to the “recovery” folder of USB drive.
Cautions)
1. USB drive shall be FAT32 file format. Its doesn’t support NTFS format.
2. Only one related .bin file shall be in recovery folder.
3. Do not change the file name. If it is different, the boot from USB will not work.
Step 3: Attach the USB device to the STB via any available USB port.
Step 4: Turn power on while pressing OK key on front panel.
Step 5: Keep pressing OK key until showing “Lxxx” message on LED of front panel.
Step 6: Check TV screen that s/w is recovering(updating) by USB drive.
Step 7: The STB will restart automatically after finishing s/w recovery (update).

http://www.4shared.com/rar/aNj0rPkH/KD_P...B2013.html

Note: you can use any software bin file of X5 for recovery......
semoga berjaya...:):)
http://stbfirmwares.com/Thread-Openbox-X5-Recovery-tool-and-method

Thank for sharing.! :p
 
openbox x3 firmware ada tak ? . mohon share .... cari tak jumpe ..
 
Back
Top
Log in Register