BTC USD 84,194.9 Gold USD 4,285.46
Time now: Jun 1, 12:00 AM

Dr3amb0x Tips & Tricks - Khas untuk Enigma2

Bagi channels L1NK dan 1PM SD, sila gunakan mgcamd atau oscam.

Rujuk index di muka surat #1 untuk tutorial penggunaan mgcamd dan oscam
dah berjaya gunakan mgcam masalahnya kadang2 gambar jd hanging untuk seketikan (bukan masalah scramble) kena setting sesuatu ke?
 
dah berjaya gunakan mgcam masalahnya kadang2 gambar jd hanging untuk seketikan (bukan masalah scramble) kena setting sesuatu ke?
kawan ada perasan kadang-kadang jadi masalah ni

tapi kawan tak ambil peduli sangat sebab kawan lebih banyak menggunakan cccam berbanding mgcamd

kawan belum jumpa jalan penyelesaiannya
 
HOWTO DREAMSET : make your own channel list

HOWTO DREAMSET : make your own channel list



How to make your own settings (channel list)
- First of all, download latest Dreamset here (x32 or x64):
http://www.dreamset-editor.com/
- Now, run Dreamset and go to “setup” tab :
1.jpg
- Enter your Dreambox ip, user and password
-On tab“Firmware”, chose “Enigma2 ver 4 (HTTP Reload)” for Enigma2 and “Enigma 1 (rel109)” for Enigma1
-Click on tab “test Configuration”, if you get at least the first line with OK, you are on the good way
2.jpg
- If the last 2 tabs are showing errors, you can ignore (this happens with a Brand new installed image)
- Now click on tab “Save Configuration” and after click on tab “Ok”
3.jpg
- Now Go to Tab “New” and chose “Internet settings”
4.jpg
- Leave the internet settings on “King of sat”, and Tick the satellite cases that you are interested
- Chose your TV and Radio Services, and you can also untick the cases “Create languages and Encryption list’s”
- If you don’t use C Band, Tick the case “Skip C Band”
5.jpg
- Click On Tab “Download”
6.jpg
- When the download is Finish, Click on tab “Exit”, and you should get something like this:
7.jpg
- We are almost there, to Finish your Brand New settings, you just need to go “Transfer”tab
8.jpg
- And Click on the “Write” tab, wait a few seconds, and Voila !
9.jpg
- To Finish, go to menu -> standby/restart and restart GUI
 
Last edited:
HOWTO DREAMSET : make your own channel list



How to make your own settings (channel list)
- First of all, download latest Dreamset here (x32 or x64):
http://www.dreamset-editor.com/
- Now, run Dreamset and go to “setup” tab :
1.jpg
- Enter your Dreambox ip, user and password
-On tab“Firmware”, chose “Enigma2 ver 4 (HTTP Reload)” for Enigma2 and “Enigma 1 (rel109)” for Enigma1
-Click on tab “test Configuration”, if you get at least the first line with OK, you are on the good way
2.jpg
- If the last 2 tabs are showing errors, you can ignore (this happens with a Brand new installed image)
- Now click on tab “Save Configuration” and after click on tab “Ok”
3.jpg
- Now Go to Tab “New” and chose “Internet settings”
4.jpg
- Leave the internet settings on “King of sat”, and Tick the satellite cases that you are interested
- Chose your TV and Radio Services, and you can also untick the cases “Create languages and Encryption list’s”
- If you don’t use C Band, Tick the case “Skip C Band”
5.jpg
- Click On Tab “Download”
6.jpg
- When the download is Finish, Click on tab “Exit”, and you should get something like this:
7.jpg
- We are almost there, to Finish your Brand New settings, you just need to go “Transfer”tab
8.jpg
- And Click on the “Write” tab, wait a few seconds, and Voila !
9.jpg
- To Finish, go to menu -> standby/restart and restart GUI

apa beza dengan DreamboxEDIT tuan?

4 tahun lepas kawan ada cuba guna apps ni, tapi tak user friendly
 
Back
Top
Log in Register