To Sell Gila jam mesti nya gila kuasa...gila kuasa mesti gila mengintai..nahhh jam ngintai t

Use Manual Instructions:

Hold on the video button for 3 seconds to start it....the video button is also power on key...on the bottom left of the watch. The light will turn red then blue on…..it is now in standby state.
1) Video Record:
Press video button shortly, the blue light will twinkle 3 time then turn off…..it is starting to record now. During recording if press the video button shortly again, the blue light will flash 3 time to show the recording states…while flashing please press it again then the blue light will stop flashing and stay on…it preserves the recorded file and comes into standby state again. The video file formed as AVI format.
2)Camera/Pictures
Press the camera button(the top left button) shortly, the light will turn red then blue again…it takes a picture now. One flash one picture.
3)Audio Record:
Press the power key(video button....left bottom) on and the blue light will be on and enters into standby state.
Then press the camera key(the left top key) for 3 seconds and the light will turn red and flashes 3 times and turns off...then it is recording audio(only sound not video). The file formed as WAV format.


Reset: Once the watch is dead, just press the camera button(the top left key of the watch) and the video button(the bottom left key of the watch)at the same time….it will restart.
Note: If it is under standby states for more than 3 minutes, it will shut off automatically.
shoot high-definition video,

Click to expand...