Dr3amb0x Tips & Tricks - Khas untuk Enigma2

piring_ufo said:

salam..
tuan RHOMA,saya dh cuba praktik pd kotakmimpi dm500s..dh taruk kunci_updater_var.sh tu ke var/script dan dh siap ubah attribute ke 755 spt yg diberitahu..tapi tak tahu dkt mana plk nk execute nya..atau cuma perlu reboot shj lpas install? musykil jgk..#:-S

Click to expand...

En. Rhoma Irama said:

takde folder /usr/script ke?

kawan tak tahu struktur folder DM500

kalau ada bagus transfer ke sana dan setkan attribute ke 755

script perlu run menggunakan script executer. Kalau takde tuan boleh install plugin folder browser kemudian browse dan run kan script

Click to expand...

rossifumi_wlf said:

1. Install emu mgcam pada DM, Pilih version terbaru. Cara install berbeza mengikut image yang digunakan, tuan2 pasti lebih kenal image yang tuan digunakan.
2. Transfer file softcam.key dan mg_cfg ke /usr/keys/
3. Runkan mgcam
4. Cuba buka channel link atau IPM.
5. Bagi image openpli saya terpaksa buka dulu channel show1@show2@show3 dengan menggunakan ccc@m+constant.cw. Dari situ baru tukar emu mgcam dan bertukar ke channel link atau IPM.

softcamkey.rar

Click to expand...

mizal3026 said:

saya telah berjaya juga dapat chanel under link ni.... tp bila nak tengok satelite lain kena tukar dr mgcam ke ccam..cerewetlah kejadiannya...ada x cara yang leh settingkan mgcam tu agar xperlu tukar ke ccam untuk tengok satelite yang lain?

Click to expand...

wanimran said:

Maaf TT... mohon laluan utk bantu menjawab.

Bro boleh run cccam guna mgcam. caranya create atau edit file
cccamd.list

dalam nya masukkan line sptmana line dlm cccam.cfg iaitu

C: server.name.com port Username password

Click to expand...

En. Rhoma Irama said:

takde masalah tuan

kita sama-sama membantu

post sudah masuk dalam index

Click to expand...

NEOBALANOCARPUS_H said:

Paste kat sini dari http://www.cardsharing4all.com/cccammgcamdinstallguide.htm


Manual Mgcamd Install Guide

Fist visit www.cardsharing 4all.com and obtain your CWS line for Mgcamd emulator
If you can install and image on your box we have a customized enigma1 Pli image in http://www.cardsharing4all.gr with Mcamd and cccam emus pre-installed .

If you are a Newbie just follow this instructons…

1. Connect your receiver to the same network of your pc either by using a direct/crossover cable (cat 5) or connect it on the same router using a normal Ethernet cable

2. Visit http://www.cardsharing4all.gr and download winscp (http://www.2shared.com/file/NmB7FLGx/winscp438setup.html),install it on your pc on explorer mode.

3. visit http://www.cardsharing4all.gr and download e1-mgcamd_138_111023tar (http://www.2shared.com/file/PhMMoyBd/e1-mgcamd_138_111023tar.html)

4. visit http://www.cardsharing4all.gr and download e1-MGCamd-Config_130_080502tar (http://www.2shared.com/file/r0FWQ2DQ/e1-MGCamd-Config_130_080502tar.html) keep both files on your desktop for easy access.

5. Go to your receiver menu-setup-experts setup-communication setup or network and keep the first value (ip address*).it should be like this 192.168.xx.xx .remember this number

6. Open Winscp on your pc and press the button "new” , In the field "Host name" add your receiver *ip address."Username" is root ,"Password" is dreambox, "file protocol" should be ftp and "Port" 21.

7. Press "Login" button in Winscp and should see now your receiver file system.

8. From Winscp popup window go to your receiver /tmp folder and add by drag and drop e1-mgcamd_138_111023tar and e1-MGCamd-Config_130_080502tar.

9 Go to your receiver blue panel or in add-ons from menu and choose manual install.

10 install fist e1-mgcamd_138_111023tar and after install e1-MGCamd-Config_130_080502tar.

11. Open again Winscp and go to your receiver Var/keys folder and if you done this correct you should see the file newcamd.list.

12 Edit this file and paste inside your cws line .

13 Go to blue panel or softcam setup from your receiver menu and choose as default emu mgcamd 1.38

Now you can see all channels clearing .Happy Cardsharing…
Admin

Note: This tutorial is for EDUCATIONAL PURPOSES ONLY.

Click to expand...

herokicap said:

salam semua.
secara tetiba2 smlm dreambox dm800se hamba tidak berfungsi. takut anak ada tertekan pape setting je. tp bila dah reinstall backup setting pun still tak ok.

troubleshoot yg dah dibuat -

1)line kat dalam tu (ada 5 server)bila test kat openbox s10 semuanya ok.
maksudnya line ok. (walau dapat tv 1 dan 3 je, hehe)

2)dah try pakai dish tu kat njoi dan s10-ok

3)dah try paka kabel rj45 yg lain- still tak ok.

4) dah tukar modem lain, still tak ok.

soalan - so apakah troubleshoot yg perlu dilakukan untuk mengenalpasti permasalahan ini? sy bukan tak nak flash sdiri, tp gerun sikit dengan no ca found, hehehe....

Click to expand...

En. Rhoma Irama said:

check network configuration

Click to expand...