azmann33
Legendary Member
- Messages
- 13,254
- Joined
- Mar 2, 2009
- Messages
- 13,254
- Reaction score
- 2,010
- Points
- 261
- Awards
- 1
AIR CON STOP LEAK - 4 in 1
-R134a
-Oil Compressor
-O-ring Conditioner
-Fluorescent Dye
Mampu menampung kebocoran kecil sistem air con kenderaan anda.
Asik asik kena tambah gas.
Nak tukar cooling coil mahal.,,,,.I Sinar tak lulus
Cuba lah guna air con stop leak ini.
DIY-- boleh masukan sendiri.
DIY-- boleh masukan sendiri.
DIY-- boleh masukan sendiri.
Nak order?
Harga RM44++ sahaja.
Kadang -kadang ada promosi dalam Kedai Shopee kami.
Bitop A/C stop leak will permanently stop leaks in condenser, connection hoses, evaporators,gaskets and o-rings in systems that can hold 5 inches vaccum for 25 minutes. If is not recommended for systems that lose more than 1 pound per day or leaking compressors. It is 100%safe for all A/C systems, and will not damage the orifice tubes of recovery equipment.
Air Conditioner Stop Leak
Direction 1. Turn sliver twist valve all the way in a clockwise direction. 2. Shake can well. 3. Attach delivery system to can by screwing the red adapter to the top of the can puncturing the protective film. 4. Star car and turn A/C to max cooling. 5. Attach the quick coupler to the low side service port. 6. Once the quick coupler is attached check guage for accurate pressure reading. See table to compate outside temperature to sufficient pressure in system. If guage reading shows deficient pressure,slowly turn twist valve counter clockwise to release product. 7. Hold the can in a upright position and gently shake every 5 seconds while system is being charged. It should take 5-12 minutes for the can to be empty. 8. Check guage throughout process to measure psl. Guage reading is only accurate when the compressor is cycling. Do not over charge!If system pressure is still low, add more r134a.
Features:
1. Quickly and efficiently fill and seal system loopholes.
2. Long-term effective prevention of loopholes.
3. Does not damage the air conditioning system, will not pollute the circulatory system.
4. Once it is filled, it can seal the air conditioning system and can repair the evaporation condenser, aluminum tube, rubber tube, O-ring and so on.
Operation:（Professionals are strongly recommended to operate and air must be vented.）
1. Prepare the refrigerant gas filling tool, find the air conditioning low pressure port, and unscrew the dust cap.
2. Start the engine and turn on the air conditioning cooling system to maximum. To ensure that the compressor is working all the
time, open the door window.
3. Drain the air. Skilled and professional air conditioning maintenance personnel understand it.
4. When filling, shake it a little, and the bottle mouth is facing down, so that the liquid is injected.
5. The air conditioning system is running for 15 minutes to allow the ac stop leak to circulate.
6. If the air conditioner lacks refrigerant, replenish the refrigerant until the clutch engages.
Bitop A/C stop leak will permanently stop leaks in condenser, connection hoses, evaporators,gaskets and o-rings in systems that can hold 5 inches vaccum for 25 minutes. If is not recommended for systems that lose more than 1 pound per day or leaking compressors. It is 100%safe for all A/C systems, and will not damage the orifice tubes of recovery equipment.
Air Conditioner Stop Leak
Direction 1. Turn sliver twist valve all the way in a clockwise direction. 2. Shake can well. 3. Attach delivery system to can by screwing the red adapter to the top of the can puncturing the protective film. 4. Star car and turn A/C to max cooling. 5. Attach the quick coupler to the low side service port. 6. Once the quick coupler is attached check guage for accurate pressure reading. See table to compate outside temperature to sufficient pressure in system. If guage reading shows deficient pressure,slowly turn twist valve counter clockwise to release product. 7. Hold the can in a upright position and gently shake every 5 seconds while system is being charged. It should take 5-12 minutes for the can to be empty. 8. Check guage throughout process to measure psl. Guage reading is only accurate when the compressor is cycling. Do not over charge!If system pressure is still low, add more r134a.
Features:
1. Quickly and efficiently fill and seal system loopholes.
2. Long-term effective prevention of loopholes.
3. Does not damage the air conditioning system, will not pollute the circulatory system.
4. Once it is filled, it can seal the air conditioning system and can repair the evaporation condenser, aluminum tube, rubber tube, O-ring and so on.
Operation:（Professionals are strongly recommended to operate and air must be vented.）
1. Prepare the refrigerant gas filling tool, find the air conditioning low pressure port, and unscrew the dust cap.
2. Start the engine and turn on the air conditioning cooling system to maximum. To ensure that the compressor is working all the
time, open the door window.
3. Drain the air. Skilled and professional air conditioning maintenance personnel understand it.
4. When filling, shake it a little, and the bottle mouth is facing down, so that the liquid is injected.
5. The air conditioning system is running for 15 minutes to allow the ac stop leak to circulate.
6. If the air conditioner lacks refrigerant, replenish the refrigerant until the clutch engages.
Last edited:
